Epson 7900p - Manual (Page 79)

Fine-tuning the Projector 79
7. When you see this screen, select a zoom rate (display size), and
then press Enter .
8. When you see the message Save image as user’s logo? , select
Yes and press Enter . Saving the logo takes about 15 seconds. Do
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message Completed , press Esc .
Choosing When to Display the Image
After your image is saved, you can set it up as the startup screen, or the
screen you see when there’s no signal or when your press the
A/V
Mute button.
1. Press the Menu button to display the menus screen (if not already
displayed).
2. To display your image as the startup screen, select the
Advanced1 menu.
3. Select Startup Screen , highlight ON , and press Enter .
4. Select the Setting menu.
Set the zoom rate.
Zoom rate:
100% 200% 300%
User's Logo
note
If the User’s Logo Protect
option has been set to ON ,
the No-Signal Msg. and
A/V Mute settings cannot be
changed. You need to turn
the protect function off first.
See page 81 for details.
Once you’ve saved a user’s
logo, you cannot reset the logo
setting to its factory default
(no logo).