Epson 7900p - Manual (Page 25)

Setting Up the Projector 25
Connecting Using a BNC-style Cable
1. Locate a BNC-style video cable (one may be included with your
video equipment).
2. Connect the cable between your player and the corresponding
R/G/B connectors on the projector.
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.
5. Once the projector is turned on, enter the projector’s Setting
menu and make sure BNC Input is set to Auto ; see page 74.