Epson 7900p - Manual (Page 32)

32 Setting Up the Projector
Connecting an External Monitor
If you want to monitor your presentation close-up (on a monitor
placed beside the projector) as well as on the screen, you can connect
an external monitor. You can use it to check on your presentation or
switch between picture sources, even if you’ve pressed the
A/V Mute
button to turn off projection on the screen.
To attach an external monitor, connect it to the projector’s Monitor
Out port, as shown:
Follow these guidelines to view images on the monitor:
■ The monitor displays the image from the currently selected
computer source. Press the
Preview button if you want to display
all the active sources at the same time (see page 56).
■ You can also view images on the monitor while the projector is in
Standby mode, if this mode has been enabled (see page 75).
note
If you want to connect an
external monitor to the
Monitor Out port, your
computer must be connected
to either the
Computer or
BNC ports. The Monitor
Out port does not support a
DVI connection.
External monitor