Epson 7900p - Manual (Page 22)

22 Setting Up the Projector
Connecting an S-Video Source
1. Locate an S-Video cable (one is usually provided with your video
equipment, or you can purchase one from Epson; see page 15).
2. Connect the cable between the S-Video connector on your player
and the S-Video connector on the projector:
3. If you want to play sound through the projector, see page 33 for
instructions on connecting an audio cable.
4. If you don’t need to make any other connections, see Chapter 2
or the Quick Setup sheet for instructions on turning on the
projector and adjusting the image.
5. Once the projector is turned on, enter the projector’s Video menu
and make sure Video Signal is set to Auto ; see page 74.