Epson Stylus Scan 2500 - Manual (Page 12)

12
Setting up your Stylus Scan 2500
Note:
If you are connecting your Stylus Scan to the USB port, the following message
appears.
Click OK. Installation for other applications begins automatically. Follow the
on-screen instructions.
9. Parallel connection:
When installation is complete, click OK to start the EPSON Screen Calibration
utility.
Note:
Be sure to calibrate your screen and Stylus Scan to ensure that the colors of
reproduced images closely match the originals.
USB connection:
After the applications have been installed, restart your computer. Then turn on the
Stylus Scan by pressing the
P power button.
Plug the appropriate end of the cable into the USB port on the back of the Stylus
Scan. (The end that fits the Stylus Scan has a different shape from the end that fits
the computer.)
Note:
To connect the Stylus Scan to a USB port, you need a standard shielded USB
cable.
Connect the other end of the cable to the computer’s USB port.
Note:
If you have more than one USB hub connected to your computer, connect the
Stylus Scan to the hub that is connected directly to your computer. If the EPSON
Stylus Scan does not work properly when connected to the hub, connect it
directly to the computer’s USB connection. To connect your Stylus Scan via a
USB hub, follow the instructions given in the online Setting Up Guide.
Follow the on-screen instructions to install the printer and scanner drivers. When
requested to do so, type E:\EPSON\ENGLISH (or your preferred language) in the
Copy files from box and click OK. If your CD-ROM has a drive letter other than
E, substitute the appropriate letter.
During the driver installation, the EPSON Screen Calibration utility starts
automatically.
Note:
Be sure to calibrate your screen and Stylus Scan to ensure that the colors of
reproduced images closely match the originals.