Epson Stylus Scan 2500 - Manual (Page 13)

13
Setting up your Stylus Scan 2500
English
10. In the following window, move the slider to the right or left until the two shades
of gray horizontal stripes match.
Note:
The gray stripes will not perfectly blend together; however, try to make the two
tones match as closely as possible.
11. Click OK to register the calibration setting.
12. Follow the on-screen instructions to complete the installation.
Note:
Do not change the device name (leave it as EPSON Stylus Scan 2500), otherwise
your Stylus Scan does not work correctly.
❚ Installing the Software in Your Macintosh
To print and scan with your Stylus Scan, you need to install the following software
included on the EPSON Stylus Scan 2500 Software for Macintosh CD-ROM
shipped with your Stylus Scan. This software must be installed before connecting the
Stylus Scan to your Macintosh.
■
EPSON Stylus Scan 2500 Drivers
Printer Driver
Allows you to use the Stylus Scan’s printer function.
EPSON Stylus Scan FB TWAIN
EPSON Stylus Scan FB TWAIN controls the Stylus Scan’s scanner function.
EPSON Scanner Monitor
This software detects when the "Scan Button" is pressed on the Stylus Scan panel.
The "Scan Button" automatically starts the software selected in the EPSON
Scanner Monitor.
d