Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 27)

Items Settings and Explanation
Enable SNMPv3 SNMPv3 is enabled when the box is checked.
User Name Enter between 1 and 32 characters using 1 byte characters.
Authentication Settings
Algorithm Select an algorithm for an authentication.
Password Enter between 8 and 32 characters in ASCII (0x20-0x7E).
Confirm Password Enter the password you configured for confirmation.
Encryption Settings
Algorithm Select an algorithm for an encryption.
Password Enter between 8 and 32 characters in ASCII (0x20-0x7E).
Confirm Password Enter the password you configured for confirmation.
Context Name Enter between 1 and 32 characters using 1 byte characters.
Related Information
& “Configuring SNMPv3” on page 26
Connecting the Printer to an IEEE802.1X Network
Configuring an IEEE802.1X Network
If the printer supports IEEE802.1X, you can use the printer on a network with authentication that is connected to a
RADIUS server and a hub as an authenticator.
1. Access the printer's Web Config and select Network Security Settings > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
Note:
You can share settings between Ethernet and Wi-Fi.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The printer is updated.
Related Information
& “Accessing Web Config” on page 11
& “IEEE802.1X Network Setting Items” on page 28
& “Cannot Access the Printer after Configuring IEEE802.1X” on page 55
Administrator's Guide
Using the Printer in a Secure Network
27