Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 33)

Importing a CA-signed Certificate
c
Important:
❏ Make sure that the printer’s date and time is set correctly.
❏ If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time.
1. Access the printer’s Web Config and select Network Security Settings > SSL/TLS, IPsec/IP Filtering or
IEEE802.1X
> Certificate.
2. Click Import.
A certificate importing page is opened.
3. Enter a value for each item.
Depending on where you create a CSR and the file format of the certificate, required settings may vary. Enter
values to required items according to the following.
❏ A certificate of the PEM/DER format obtained from Web Config
❏ Private Key: Do not configure because the printer contains a private key.
❏ Password: Do not configure.
❏ CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PEM/DER format obtained from a computer
❏ Private Key: You need to set.
❏ Password: Do not configure.
❏ CA Certificate 1/CA Certificate 2: Optional
❏ A certificate of the PKCS#12 format obtained from a computer
❏ Private Key: Do not configure.
❏ Password: Optional
❏ CA Certificate 1/CA Certificate 2: Do not configure.
4. Click OK.
A completion message is displayed.
Note:
Click Confirm to verify the certificate information.
Related Information
& “Accessing Web Config” on page 11
& “CA-signed Certificate Importing Setting Items” on page 34
Administrator's Guide
Using the Printer in a Secure Network
33