Epson EB-1460Ui - Manual (Page 12)

Installation Guide
11
a Installing the Touch Unit ( s p.87 )
b Adjusting the Angle of Laser Diffusion ( s p.91 )
c Performing Touch Calibration ( s p.84 )
When two or more projectors are installed in parallel
When using the multi-projection function (when multiple projectors are installed in parallel to project one,
large screen), follow the steps below.
a Installing the Setting Plate and the Projector ( s p.32 )
b Adjusting the Position of the Projector ( s p.46 )
c Setting the Projector ID ( s p.95 )
d Adjusting the Image in Multi-Projection ( s p.98 )
When two projectors are installed in parallel and you want to use the interactive function, make the following
settings. Make the settings for each projector.
a Setting Projector Synchronization ( s p.100 )
b Setting Multi-Projection Interactive ( s p.101 )