Epson EB-1460Ui - Manual (Page 62)

Installation Guide
61
Installing the Control Pad and the Pen Stand
Installing the Control Pad
See the following for the installation location of the Control Pad.
s "When installing the Control Pad and the Pen Stand" p.27
a
Remove the front cover
b
Check the installation position and secure with commercially available M4 screws (20 mm
x4)
Warning
•
Be careful not to tilt the screws to the installation surface when securing.
•
Make sure that the Control Pad is secured properly.
•
Do not use double-sided tape or magnets to secure the Control Pad.
c
We recommend checking the operation of the Control Pad before securing with screws.