Epson EB-1460Ui - Manual (Page 7)

Using the Product Safely
6
Touch Unit installation location (EB-1460Ui/EB-1450Ui only)
• When using the Touch Unit, install the projector using one of the following methods. The Touch Unit cannot be used
if another installation method is used.
• Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen.
• Install vertically on a table and project from the front of the desk. (When installing vertically on a table, you need
the optional Interactive Table Mount (ELPMB29).)
• Before installing the Touch Unit, make sure that the installation surface is not warped or distorted, and that any
unevenness on the screen surface is less than 5 mm.
• When installing the Touch Unit on a whiteboard, secure the Touch Unit with magnets or screws.
• When installing the Touch Unit outside the whiteboard, you need the supplied Touch Unit Bracket.