How to make a poster from your printouts – Epson B 510DN User Manual
Page 113
Advertising
How to make a poster from your printouts
Here is an example of how to make a poster with 2x2 selected under Poster Printing and Overlapping
Alignment Marks
selected as the Print Cutting Guides.
1. Cut off the margin of Sheet 1 along a vertical line through the center of the top and bottom cross
marks:
2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two
sheets together from the back:
B-310N/B-510DN User’s Guide
Printing with Special Layout Options 113
Advertising
This manual is related to the following products: