Epson B 510DN - Manual (Page 155)

1. Make sure the printer is turned on.
2. Make sure that no lights are indicating errors.
3. Make sure that A4 size paper is loaded in the sheet feeder.
4. Access the EPSON Printer Utility3.
& See “Accessing the printer driver for Mac OS X” on page 17.
5. Click the Head Cleaning button in the Utility dialog.
6. Follow the on-screen instructions.
The P power light flashes while the printer performs the cleaning cycle.
c
Caution:
Never turn off the printer while the P power light is flashing. Doing so may damage the printer.
Note:
❏ If print quality has not improved after repeating this procedure about four times, turn the printer off
and wait for at least six hours. Then run the nozzle check again and repeat the head cleaning if
necessary. If print quality has still not improved, contact your dealer.
❏ To maintain print quality, we recommend printing a few pages on a regular basis.
Using the control panel
Follow the steps below to clean the print head using the control panel.
1. Make sure that A4 size paper is loaded in the front paper cassette.
2. Make sure that READY or POWEAR SAVE appears on the LCD screen, and then press the r Right
button. Menu appears on the LCD screen.
3. Press the d Down or u Up button to select MAINTENANCE, and then press the OK or r Right
button.
4. Press the d Down or u Up button to select CLEANING, and then press the OK or r Right button.
5. Press the OK button to start cleaning and the P Power light begins flashing.
B-310N/B-510DN User’s Guide
Maintaining Your Printer 155