RIGOL M300 - Manual (Page 103)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
2-55
Edit the Scan Task
Press Edit in figure 2-68, enter the task editing interface.
Figure 2- 62 Edit the Task
Table 2- 42 Menu Description
Function
Menu
Setting Description
Name Edit the current scan project.
Task Edit the current scan task.
Done Confirm this change and save.
Store the changing and return.
After choosing the scanning task to edit, the later operation is the same as creating a
new scanning task.
Load the Scan Task
Press Load in Main Interface of Scanning to load the scan task.
Figure 2- 63 Load a Task
Use the direction key to locate the scanning task file required, and then press Read.