RIGOL M300 User Manual
Page 41
RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
1-31
Figure 1- 44 Input “Corrsp” Data
Press SEG, you are allowed to segment the reference value with different
arithmetic.
Figure 1- 45 Turn on/off “SEG”
Press Arith to select the algorithms to Linear or Curve.
Figure 1- 46 Select the Algorithms
Press Add to input all the required reference values.
Figure 1- 47 View Sensor Data
Algorithms Explanation:
Line: at least 2 groups of data are need in a segment.
Curve: at least 5 groups of data are need in a segment.
Press
to New interface then press Done button, you have finished the input work,
then you can use this sensor reference immediately, or you can save it into the
built-in storage space or your U-disk for future work.