RIGOL M300 - Manual (Page 39)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
1-29
To Measure Sensor
The DM3000 converts the sensor physical properties into electrical voltage,
resistance, current for measurement. So it needs the sensor name, sensor type,
sensor physical unit, sensor reference data, and arithmetic.
Figure 1- 37 Sensor Measurement Interface
Table 1- 12 Menu Description
Option Menu Description
New Newly built sensor reference data file
Edit Edit a sensor reference data file
Load Load a sensor reference data file
Display Set display mode
Steps:
1. Connect test leads as shown in Figure 1- 53, Figure 1- 54, red test leads to the
HI Terminal, black test leads to the LO Terminal.
2. Press to select the Sensor function.
3. Press New, the display shows:
Figure 1- 38 Create a New Sensor
(1). In New function interface, press Prpty to edit the sensor Name, sensor Type and
physical characteristics of the sensor.