RIGOL M300 - Manual (Page 88)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
2-40
Factory Defaults Setting
Press  System  Cfg  Default, then restart the system to factory default
state. The Parameter shown below:
Table 2- 32 Parameter Lists of Factory Defaults:
Math Function Factory Defaults Setting
Math Stats Close
Math Statistic
Math Register All registers cleared
* dBm Resistance *600Ω
Trigger Parameter Factory Defaults Setting
Interval 30ms, 200ms, 400ms according to Digit Resolution
Samples 1
Hold 0.1％
Trigger Sources Auto Trigger
High-Speed Data Log Factor Defaults Setting
Measurement
Parameter
Factory Defaults Setting
* Continue Resistance 10Ω
Filter Fast
DC Resistance 10MΩ
Digit Resolution 6 ½
Rate Close
Measurement Function DCV
range Auto