RIGOL M300 - Manual (Page 40)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
1-30
Figure 1- 39 Set Property of the Sensor
 Press Name to create a name for the sensor reference name.
Figure 1- 40 Input Sensor Name
Press to return the higher level menu.
 Press Type to select the sensor type, include: DC voltage，DC current，2-wire,
4-wire resistance and frequency.
Figure 1- 41 Select Sensor Type
Press to return the higher level menu.
 Press Unit to select the physical unit, include: °, ℃, °F, % and USER.
Figure 1- 42 Select Unit
Press to return the higher level menu.
(2). In New interface, press Define button to build the reference table.
Figure 1- 43 Define Sensor Data
 Press Add to input the Measured and Corresponding value to the reference value
data.