RIGOL M300 - Manual (Page 87)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
2-39
Set Up Digit Format
Press  Sys  Format, and enter the menu shown below:
Figure 2- 39 Set Digit Format
Table 2- 31 Menu Description
Function
Menu
Description
Radix
Point
Expresses radix point with or .
Separator Expresses separator with , space or none.
Save all changes, back to a higher level menu.
There are 6 kinds of display mode, take “ ” and “space” for example:
Figure 2- 40 “ ” radix point, “space” separator
Notice:
The decimal and the separator cannot be the same mode, if the decimal is
, then
the separator can only be none of space; in contrarily, if the decimal is , then the
separator can only be
, none of space.