RIGOL M300 - Manual (Page 79)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
2-31
To set the IP address, there are three methods: DHCP, Auto IP and Manual IP.
 The ascending orders of priority about the three methods are: DHCP, Auto IP
and Manual IP. If not only one method is enabled, the method which has higher
priority works.
 To use DHCP, turn “ON” DHCP;
 To use Auto IP, turn “OFF” DHCP and select Auto IP;
 To use Manual IP, turn “OFF” DHCP and Auto IP and then select Manual IP to set
the IP address manually, see the figure below.
Figure 2- 29 Manual IP Setting Interface
Table 2- 24 Menu Description
Function
Menu
Settings Description
IPAddr Setup IP address.
Mask Setup Subnet Mask.
Gate Setup default Gateway.
Save all the changes and go back to last
Manu.