Rose Electronics Xtensys - Manual (Page 17)

XTENSYS INSTALLATION AND OPERATIONS MANUAL
11
Main Menu
Figure 3. Main Menu
Save all changes made. If not saved, changes will be lost when power is removed from a Unit.
The Main configuration menu is the starting point for the configuration menus. From this menu, you can configure
the System, Computers, KVMs, Users, Profiles, Groups, and Languages. The connection Status for all connected
equipment can be displayed. The “Save” section saves any changes and “Exit” will quit the OSD system and return
to normal operation.
To display the “Main menu”, press and release the left control [Ctrl] key, then, within 2 seconds, press the F12 key.
Command characters following the press and release of the left control [Ctrl] key, like the F12 key, must be entered
within 2 seconds or the command is aborted. All numeric inputs to the menu system must be done using the numeric
keys above the keyboard. The numeric keypad cannot be used for entering numbers. Keyboards that do not have
separate page up and page down keys, the page up and page down keys on the keypad can be used for scrolling
through the menu pages. The main menu will display on top of a currently connected computers video. If no
computer is connected to supply the video, the display’s background is black.
The following pages explain each of the Xtensys menus and the options available.