Rose Electronics Xtensys - Manual (Page 34)

XTENSYS INSTALLATION AND OPERATIONS MANUAL
28
Pressing the F4 key will
display the video status of the
connected computers. The
video status information will
only be shown for computers
that are connected and
powered on.
The status window shows:
 The port each computer is
connected to
 List of computers by name
 The resolution detected
 Frequency
 Actual number of Lines
 CATx cable length from
computer to Xtensys
Figure 20. Video Status menu
Pressing the F5 will display
the Device status window.
This window shows:
 Device name
 Uptime
 Firmware versions
 Activity
 OSD F/W version
Figure 21. Device Status menu