Rose Electronics Xtensys - Manual (Page 22)

XTENSYS INSTALLATION AND OPERATIONS MANUAL 16
Configure user
Figure 7. Configure User
The configure user menu is used to define a user name, assign an access password, and assign a specific profile to
the user. Duplicate names are acceptable; however, all persons using the same user name will have the same
access rights.
User name (Default: User xx, where x = 1 to 64)
To change a user name, select it and press [Enter]. An input box will display. Type in a new user name and press
[Enter]. (8 characters max. case sensitive)
Password (Default: no password)
This field assigns a unique password to a selected user. Any user station that has “Login” enabled, the user must
enter their username and password to gain access to the station. To assign or change a user password, select the
user, then the password field and press [Enter]. An input box will display. Type in a password for the selected user
and press [Enter]. Passwords can be up to 8 characters in length and are case sensitive.
Profile (Default: Profile x, where x = 1 to 64)
This field is used to assign an access profile to a selected user.
Profiles can be defined to limit the type of access to the computers. To change an assigned profile for a selected
user, first select the user, and then select the profile to change and press [Enter]. A selection box will display listing
the profiles available. Select the profile to assign to the selected user and press [Enter]. Use the page up/down keys
for more profiles. Profiles are defined on the “Configure profile” menu.