TA Triumph-Adler DC 2020 - Manual (Page 22)

Page 2-4
2-3-1 If you are having trouble connecting to the scanner from a Web browser…
If you are trying to make settings related to the Scanner Interface Card or utilities in the scanner itself from
a Web browser and those settings are not being applied properly, first try to reboot the Scanner Interface
Card: Click on “Reset” in the menu frame, and then click on “Yes” in the window that appears to confirm
whether or not you really want to reboot. The Scanner Interface Card will then reboot. This will take a few
minutes, so please wait until the reboot is completed.
2-3-2 If a message appears which informs you that you can not connect, such as “Could
not open Internet Site XXXXX”...
If a message like this appears in your Web browser, check the following point:
• Is the initial mode screen displayed on the scanner?
-> If the initial mode screen is NOT displayed, return to that mode screen.
2-3-3 If “Cannot Find Page” appears…
If a message like this appears in your Web browser, check the following point:
• Is the scanner fully up and running?
-> If NOT, wait for awhile before trying to connect again.
2-3 Cautions