TA Triumph-Adler DC 2020 - Manual (Page 99)

Page 3-56
3-4 TWAIN Source
4 Original Type…Lets you select, from among the following, the type of original that is actually being
scanned: Photo, Text, Photo & Text and OCR
5 Resolution…Lets you select, from among the following, the desired scanning resolution: 600 dpi, 400
dpi, 300 dpi and 200 dpi
6 Scanning…Lets you determine the scanning operation.
Auto: If you set the original to be scanned on the platen, that original will be scanned and the scanner
will wait for the next command. If you set the original(s) in the DF, the scanning operation will continue
until all of the set originals have been scanned.
Page: If you set the original(s) in the DF, only one (the first) original will be scanned.
7 Page Separation…Lets you select whether or not you want to scan both sides of the original when you
set the original(s) in the DF.
None: Only one side of the original will be scanned.
2 Sided: Both sides the original will be scanned.
2 Sided (Rotate): Both sides the original will be scanned, but the image on the back side will be
rotated 180
°.