6 system setting, 6-1 setting conditions, 6 system setting -11 – TA Triumph-Adler DC 2020 User Manual
Page 29: 6-1 setting conditions -11
Advertising
Page 2-11
Settings for the scanner interface card are performed under the System Setting items. The settings for
each item can only be changed when the scanner is in the “Ready” state.
2-6-1 Setting Conditions
It is necessary for you to enter the administrator’s password in order to access the settings related to either
the scanner interface card or to the scanner itself.
• The administration password can be changed through the Set Password item under System Setting.
(There is no password registered when the software is used for the first time).
2-6 System Setting
Advertising