TA Triumph-Adler DC 2023 - Manual (Page 144)

* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Press the CONFIGURE key.
2. Use the cursor up or the cursor down key to select “Paper feed sel”.
6-8
Turning Reception Date & Time Print
Out ON/OFF
Select here whether or not you want information - such as the time of
the reception, information related to the transmitting party and the
number of pages transmitted - to be printed out at the top edge of
received documents. This information is convenient for checking the
actual time you received documents, especially when they were sent
from a location that is in a different time zone than you are. In order
to have this information printed out, it is necessary to turn this
function ON in advance.
* If a received page is split and printed onto 2 or more separate
sheets of paper, the time and date of reception will be printed only
on the first of those sheets.
* If Fax Forwarding is turned ON, the true date and time of reception
at this fax will not be printed out on the documents received at the
selected destination. If, however, the forwarding operation is
unsuccessful even after redialling the predetermined number of
times, the reception date and time information WILL be displayed on
the documents that will then be automatically printed out at this fax.
* If you want to cancel the procedure part way through, press the
Reset key. The operation panel will return to the initial mode settings.
1. Press the CONFIGURE key.
2. Use the cursor up or the cursor down key to select “RX date/time”.
3. Press the Enter key.
4. Use the cursor up or the cursor down key to select whether you
want to turn Reception Date and Time Print Out ON or OFF.
* The asterisk (*) in the message display indicates the current
setting.
* If you want the reception date and time to be printed out, select “On”.
5. Press the Enter key.
The setting for the reception date and time print out is complete.
* If you are finished making settings, press the Reset key.
The operation panel will return to the initial mode settings.
Selecting the Paper Feed Selection Mode
Select here among the 3 available modes for feeding paper when
printing out all documents that are received when the fax is in the
Fax Operation mode – as well as for printing out reports and lists:
the Auto Selection mode, the Fixed Size mode or the Fixed Cassette
mode.
* This setting CANNOT be changed while there are documents
remaining in memory.
Section 6 Various Settings and Registration in this Fax
3A180100A
3A1/FaxSystem(A)/MCE-Eng
/ 164
RX date/time:
➪ On
*Off
Set fax:
DF scanning :Std. orig.
Reception mode:Fax recept
➪ RX date/time :On
Set fax:
DF scanning :Std. orig.
Reception mode:Fax recept
➪ RX date/time :Off
Set fax:
Reception mode:Fax recept
RX date/time :Off
➪ Paper feed sel:Auto sel.
<Auto Selection mode>
In this mode, the fax will automatically select and feed the most
appropriate paper.
<Fixed Size mode>
In this mode, paper feed will be accomplished from the drawer
that contains the selected size of paper. If there is no paper of the
selected size in any drawer, the documents will be received
directly into memory.
* You CANNOT select more than one size of paper in this setting.
* If the same size of paper is set in more than one location,
the upper drawer will have priority for paper feed.
<Fixed Cassette mode>
In this mode, paper feed will be accomplished from a specified
drawer regardless of the size of the received documents.
If there is no paper in the selected drawer, the documents will be
received directly into memory.
* You CANNOT select more than one drawer in this setting.
01-DEC-1999 12:00
Set original
01-DEC-1999 12:00
Set original
Set fax:
End
➪
TTI :Outside p.
Print report P
Set fax:
End
➪ TTI :Outside p.
Print report
P
06/Setting/3A1/MCE/Eng.q 23-12-1999 14:29 Page 6-8