TA Triumph-Adler DC 2242 - Manual (Page 160)

Setup and Registration
OPERATION GUIDE 6-27
6
4 Press [FAX No. Entry].
5 Use the numeric keys to enter fax number of the
other party, and press [Encrypted Transmission].
NOTE: When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
6 Press [On] and select the encryption key number.
7 Press [OK] and go to step 10. When the selection
of an encryption box is required by the other party,
press [Encryption Box] and go to the next step.
NOTE: When the machine receives originals, the
encryption box is not used.
8 Press [On] and use the numeric keys to enter the
encryption box number (4 digits), and press [OK].
9 Press [OK].
10 Press [OK].
11 Press the Start key. The transmission will start.
08/08/2009 10:10
Cancel OK Next Dest.
Pause
FAX No. Entry
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
On Hook
Backspace Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book
Ready to send. Destination
Status
Cancel OK
FAX No. Entry - Encrypted Transmission
Off
On
Off
Key 01
1/1
Encryption
Box
Encryption Key No.
08/08/2009 10:10 Status
Key 04
Key 05
Key 03
Key 02
Ready to send.
OK
Enter box number using numeric keys.
Cancel
Off
FAX No. Entry - Encryption Box
0002
On
Box No.
08/08/2009 10:10 Status