TA Triumph-Adler DC 2242 - Manual (Page 34)

FAX Operation (Basic)
OPERATION GUIDE 3-7
3
2 Enter the fax number of the receiving system
using the numeric keys.
NOTE: Up to 64 digits can be entered as the fax
number of the receiving system.
Press [Space] to enter a space.
Use [ ] or [ ] to move the cursor.
To correct the fax number, press [Backspace] on
the touch panel, and delete the digits one by one
before reentering the fax number. To delete the
number entirely, press the Clear key on the
operation panel.
When [Add to Addr Book] is displayed, you can
register entered contents to the Address Book.
[Pause]
Pressing this key adds about three seconds of
waiting time during dialing. For example, when
dialing the receiving system on an external line,
you can use this method to insert a pause before
resuming dialing after you dial a specific number.
3 If necessary, make any detailed settings.
Press each key to change the setting, and
press [OK].
08/08/2009 10:10
Cancel OK Next Dest.
Pause
FAX No. Entry
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
On Hook
Backspace Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book
Ready to send. Destination
Status
08/08/2009 10:10
Cancel OK Next Dest.
Pause
FAX No. Entry
Sub Address
Transmission
Start Speed
ECM
Encrypted
Transmission
On Hook
Backspace Space
Add a new FAX destination.
Enter FAX number with the numeric keys.
Add to Addr Book
Ready to send. Destination
Status
Key Description
Sub Address To communicate using the sub address, press
this key. For details, refer to Sub Address
Communication on page 4-37.
Transmission Start
Speed To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.