TA Triumph-Adler DC 2242 - Manual (Page 42)

FAX Operation (Basic)
OPERATION GUIDE 3-15
3
Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than
waiting for the specified time, use the procedure below.
1 Press the Status/Job Cancel key.
2 Press [Sending Jobs], and then [Scheduled Job].
3 To cancel a delayed transmission, select the job to
be cancelled and press [Cancel].
When the cancel confirmation screen appears,
press [Yes].
Transmission is canceled.
To send delayed transmission immediately, select
the job to be sent and press [Start Now].
When the send confirmation screen appears, press
[Yes].
Transmission begins.
Cancelling Direct Transmission
During direct transmission, to cancel communication during transmission, press the Stop key on the operation
panel or [Cancel] on the touch panel. The originals that have been scanned are ejected, and the screen returns
to the send default screen. When originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the
following procedure.
NOTE: When 2 optional FAX Kits (Dual FAX option) are installed, disconnect the line currently being used for
communication.
1 Press the Status/Job Cancel key.
2 Press [Device/Communication].
Printing Jobs Sending Jobs Storing Jobs Device/
Communication
Paper/Supplies
Status Scheduled Job Log
Job No. Accepted Time Type Destination User Name Start Time
Cancel Detail
1/1
Status
12:00 0007 9:30 A OFFICE
Start Now
08/08/2009 10:10 Status