TA Triumph-Adler DC 2242 - Manual (Page 48)

FAX Operation (Basic)
OPERATION GUIDE 3-21
3
9 Press [Change] of i-FAX Address.
10 Enter the destination address and press [OK]. Up
to 128 characters can be entered.
NOTE: For details on character entry, refer to
Character Entry Method on page 2 of the Appendix.
11 Press [ ] of Mode and select Simple or Full.
12 Press [Change] of Paper Size.
13 Specify the destination conditions and press [OK].
i-FAX Address
Simple
Address:
Name E-mail SMB FTP FAX i-FAX
08/08/2009 10:10 Status
Cancel Register Back
Change
Change
Mode
Resolution
Compression
Paper Size
Transmission
mode
Description
Simple mode Transmission confirmation is not sent to the
destination machine.
Full mode Transmission confirmation is sent to the
destination machine.
Item Description
Resolution Specify the resolutions that can be received by
the destination fax machine.
If you try to send an i-FAX using a prohibited
resolution, it is automatically changed to a
permitted resolution and then sent.
•
200 × 100 dpi: Permitted (fixed)
• 200 × 200 dpi: Permitted (fixed)
• 200 × 400 dpi: Permitted or prohibited
• 400 × 400 dpi: Permitted or prohibited
• 600 × 600 dpi: Permitted or prohibited
To permit a resolution setting, press the key for
that resolution so that it is highlighted.
To prohibit a resolution, press the key again so
that it is no longer highlighted.