TA Triumph-Adler DC 2315 - Manual (Page 30)

Section 3 PREPARATIONS
3-8
Selecting the paper size (temporary setting)
1
Press the Paper Select key until the multi-bypass tray
indicator is lit.
2
Press the Number of Copies / Zoom(+) or Number of
Copies / Zoom(-) key to select the appropriate paper size.
The displayed code numbers refer to the available paper
sizes as explained in the following table.
IMPORTANT!
If you want to copy onto non-standard size paper, be sure
to use the “F15” (Non-Standard Size Paper Width)
default item to register the paper size BEFORE
attempting to select that size. (See page 6-3.)
3
Press the Recall%/Enter key. The copier will return to a
copy-ready state.
Code number Size
-A4 A4
-A5 A5
-A6 A6
-Fo Folio
-Lg Legal (8 1/2 " × 14")
-Lt Letter (8 1/2 " × 11")
-St Statement (5 1/2 " × 8 1/2 ")
-o2 Oficio II (8 1/2 " × 13")
XXX Non-standard size paper*
* The “XXX” shown here refers to the actual width of the
paper as registered under the “Non-Standard Size Paper
Width” default item and it is that registered number
which will be shown on the display.