TA Triumph-Adler DC 2315 - Manual (Page 53)

Section 6 COPY DEFAULT SETTINGS
6-3
F14 Multi-Bypass Tray Paper
Size Registers the size of paper that is to be set on
the multi-bypass tray.
* The “XXX” shown here refers to the actual
width of the paper as registered under the
“Non-Standard Size Paper Width” and it
is that number which will be shown on the
display.
-A4: A4
-A5: A5
-A6: A6
-Fo: Folio
-Lg: Legal
-St: Statement
-Lt: Letter
-o2: Oficio II
XXX: Non-Standard Size
(Inch specification default:
Letter)
(Metric specification
default: A4) 6-6
6-9
F15 Non-Standard Size Paper
Width Sets the width of the paper to be set on the
multi-bypass tray when that paper is of a
non-standard size.
* Non-standard size paper of up to 14", or
356 mm, in length can be used.
Inch specification:
4.13 – 8.50 (Default: 4.13)
Metric specification:
105 – 216 mm
(Default: 105 mm) 6-6
6-7
F16 Copy Limit Sets the maximum number of copies or copy
sets that can be made at one time. 1 – 99 (Default: 99) 6-6
6-8
F17 4-in-1 Layout Order Sets the default order in which the images will
appear within the copy page in the 4-in-1
Layout mode (see page 5-1).
* Select from between code numbers 1 and 2
when making copies length-wise, and from
between code numbers 3 and 4 when
making copies width-wise.
(Default: 1-)
6-6
6-9
F18 Borderline Sets the default borderline that will be used in
the Layout modes (see page 5-1). 1-: None*
2-: Solid line
3-: Dotted line 6-6
6-9
F19 Silent Mode Time Sets the amount of time after each copy job is
finished until the Silent mode automatically
engages and shuts down the motor inside the
copier. If you set this value to “0” seconds, the
motor will be stopped immediately after
copying is completed. 0/5/10/15/30 (seconds)
(Default: 10 seconds) 6-6
6-9
F20 Auto Clear ON/OFF Sets whether the Auto Clear function (see
page 2-5), which returns the copier to its
initial mode settings when a pre-set amount of
time elapses after each copy job is finished,
will engage automatically or not. ON*
OFF 6-6
6-7
Item
number
Default Description Available settings
Reference
page
1-:
1 2
3 4
3-: 1
2
3 4
2-:
1 3
2 4
4-: 1
3
2 4