TA Triumph-Adler DC 2315 - Manual (Page 33)

4-1
Section 4 BASIC OPERATION
1
Warm-up
Turn the power switch ON ( | ). At the end of warm-up, the
Start indicator will light.
2
Selecting the desired functions
Select from the copier’s various functions.
3
Selecting the source of paper feed
Select the location of the paper that you want to copy onto.
Press the Paper Select key to select either the upper
drawer, the Paper Feeder (option) or the multi-bypass tray.
NOTE
It is possible for you to change the default setting for
which drawer will be automatically selected.
(See “Default Drawer” on page 6-2.)
4
Selecting the image quality
The image quality mode can be selected according to the
type of original. Press the image quality select key to light
the indicator for one of the following image quality modes.
Auto Exposure Adjustment mode: Make sure the Auto Exp.
indicator is lit.
Text & Photo mode (Originals with both text and photos):
Make sure the Text & Photo indicator is lit.
Photo mode (Originals with mainly photos): Make sure the
Photo indicator is lit.
Text mode (Originals with mainly text): Make sure the Text
indicator is lit.
Selecting the Eco-Copy indicator, and thereby the Eco-Copy
mode, will cause the copy exposure to be lightened in order
to save on toner use.
Select this mode only when high quality copies are not
required.
NOTES
• It is possible for you to adjust the default copy
exposure in each of the image quality modes.
(See “Auto Exposure Adjustment”, “Text & Photo
Mode Exposure Adjustment”, “Photo Mode
Exposure Adjustment” and “Text Mode Exposure
Adjustment” on page 6-1.)
• It is also possible for you to select which image quality
mode will be the default setting in the initial mode.
(See “Image Quality Mode” on page 6-1.)
Basic copying procedure