TA Triumph-Adler DC 2316 - Manual (Page 51)

Scanning Functions
OPERATION GUIDE 5-5
Hue/Saturation/Lightness
Click this button to adjust the hue, saturation, and lightness of an image. This button
is enabled when the Color Adjustment button is selected. You can type values in the
text boxes or you can drag the sliding arrow under the each item.
Hue - specify a value in Hue box to adjust the hue up to 360 º by clicking on the
desired color on the color wheel or selecting a setting on the drop-down menu. The
level of intensity for a color simultaneously changes when the hue adjustment is
made.
Saturation - specify a value in Saturation box to adjust the saturation level of the
color. The level of saturation indicates whether the color is pale or rich.
Lightness - specify a value in Lightness box to adjust the color strength.
NOTE: These options are available only when the Color Adjustment button is
enabled.
Color Drop-out
This feature is available when Black and White or 8-Bit Gray is selected on the
Image Type drop-down menu. Click the Color Drop-out button to access a dialog box
that allows you to choose to remove the R (Red), G (Green), or B (Blue) color
channel while scanning. Increasing the brightness after removing one of the color
channels will make the image clearer.
Custom Settings
Click the Custom Settings button to access a dialog box where you can save your
scan settings and configuration settings. There are two tabs: Scan Settings and
Configuration Settings.
Scan Settings
Scan Settings tab allows you to save your scanning feature settings in a file, load
an existing file, or delete an existing file.
Saving a scan
settings file Type a name for your settings in File Name text box and
click Save. Your settings will be saved and the file name
will appear in the list box.