PLANET FGSW-2620CS - Manual (Page 17)

User’s Manual of FGSW-2620CS
3. SWITCH MANAGEMENT
This chapter describes how to manage the Web Smart Switch. Topics include:
- Overview
- Management Method
- Logging on to the Web Smart Switch
3.1 Overview
The Web Smart Switch provides a user-friendly, Web interface. With this interface, you can perform various switch con-
figuration and management activities, including:
Please refer to the following Chapter 4 for the details.
3.2 Management Method
User can manage the Web Smart Switch by Web Management via a network connection.
3.2.1 Web Management
PLANET FGSW-2620CS provides a built-in browser interface. You can manage the Switch remotely by having a remote
host with Web browser, such as Microsoft Internet Explorer, Netscape Navigator or Mozilla Firefox.
The following shows how to start up the Web Management of the Switch. Please note the Switch is configured through an
Ethernet connection. Make sure the manager PC must be set on the same IP subnet address; for example, the default IP
address of the Switch is 192.168.0.100 (the factory-default IP address), then the manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
Use Internet Explorer 7.0 or the above Web browser and enter default IP address http://192.168.0.100
After entering the user name and password (default user name and password are “admin”) in login screen
3.2.2 PLANET Smart Discovery Utility
To easily list the FGSW-2620CS in your Ethernet environment, Planet Smart Discovery Utility from user’s manual
CD-ROM is an ideal solution.
- 17 -