5 auto-negotiation, Egotiation – PLANET FGSW-2620CS User Manual
Page 77
Advertising
User’s Manual of FGSW-2620CS
5.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible
bandwidth when a connection is established with another network device (usually at Power On or Reset). This is done
by detecting the modes and speeds at the second of both devices connected. Both 10Base-T and 100Base-TX de-
vices can connect with the port in either half- or full-duplex mode. 1000Base-T can be only connected in full-duplex
mode.
- 77 -
Advertising