PLANET WGSD-10020 User Manual

Page 181

Advertising
background image

User’s Manual of WGSD-10020 Series

181

Figure 4-9-6 QoS Egress Port Schedule and Shapers page screenshot

The page includes the following fields:

Object

Description

• Schedule Mode

Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this

switch port.

• Queue Shaper Enable

Controls whether the queue shaper is enabled for this queue on this switch port.

• Queue Shaper Rate

Controls the rate for the queue shaper. The default value is 500. This value is

restricted to 100-1000000 when the "Unit" is "kbps", and it is restricted to 1-3300

when the "Unit" is "Mbps".

• Queue Shaper Unit

Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps". The

default value is "kbps".

• Queue Shaper Excess

Controls whether the queue is allowed to use excess bandwidth.

• Queue Scheduler

Weight

Controls the weight for this queue. The default value is "17". This value is

restricted to 1-100. This parameter is only shown if "Scheduler Mode" is set to

"Weighted".

• Queue Scheduler

Percent

Shows the weight in percent for this queue. This parameter is only shown if

"Scheduler Mode" is set to "Weighted".

• Port Shaper Enable

Controls whether the port shaper is enabled for this switch port.

• Port Shaper Rate

Controls the rate for the port shaper. The default value is 500. This value is

Advertising
This manual is related to the following products: