PLANET WGSD-10020 - Manual (Page 326)

User’s Manual of WGSD / WGSW Layer 2+ Series
 Current ports in used Dispalys the current PoE in-use ports.
 Class 1 ~ 4 ports Displays the current PoE class 1 ~ 4 ports.
 Power Consumption Dispalys the current power consumption (total watts and percentage)
 Reserved Power
(Reserved mode)
Shows how much the total power be reserved for all PDs.
 PoE Temperature Displays the current operating temperature of the first PoE chip unit.
 Current Power
Consumption
Shows the total watts usage of the Managed PoE Switch.

Local Port This is the logical port number for this row.

PD Class Displays the class of the PD attached to the port, as established by the classification
process.
Class 0 is the default for PDs.
The PD is powered based on PoE Class level if system working on Classification
mode. A PD will return Class to 0 to 4 in accordance with the maximum power draw
as specified by Table 4-16-2 .

Power Used [W] The Power Used shows how much power the PD currently is using.

Current Used [mA] The Power Used shows how much current the PD currently is using.
 Priority The Priority shows the port's priority configured by the user.
 Port Status The Port Status shows the port's status.
 AF / AT Mode Displays per PoE port operate at 802.3af or 802.3at mode.
 Total Shows the total power and current usage of all PDs.
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
326