PLANET HPOE-1200G - Manual (Page 17)

2.2.4 Power over Ethernet Powered Device
3~5 Watts
Voice over IP phones
Enterprise can install POE VoIP Phone, ATA and other Ethernet/non-Ethernet
end-devices to the central where UPS is installed for un-interruptible power system
and power control system.
6~12 Watts
Wireless LAN Access Points
Access Points can be installed in any location of Museum, Tourist Site, Airport, Hotel,
Campus, Factory, Warehouse, etc.
10~12 Watts
IP Surveillance
IP cameras can be installed anywhere in Enterprise, Museum, Campus, Hospital,
Bank, etc. without the need of AC sockets.
3~12 Watts
PoE Splitter
PoE Splitter splits PoE 52V DC over the Ethernet cable into 5/9/12V DC power output.
It frees the device deployment from restrictions due to power outlet locations, which
eliminate the costs for additional AC wiring and reduces the installation time.
3~25 Watts
High Power PoE Splitter
High PoE Splitter splits PoE 52V DC over the Ethernet cable into 5/9/12V DC power
output. It frees the device deployment from restrictions due to power outlet locations,
which eliminate the costs for additional AC wiring and reduces the installation time.
17
User’s Manual of HPOE-1200G / HPOE
2400G