PLANET HPOE-1200G - Manual (Page 57)

A.3 DATA OUT PoE Injector RJ-45 Port Pin Assignments
PIN NO RJ-45 SIGNAL ASSIGNMENT
1 Output Transmit Data +
2 Output Transmit Data -
3 Receive Data +
4 Power -
5 Power -
6 Receive Data -
7 Power +
8 Power +
 A.4 RJ-45 pin assignment of non-802.3af / 802.3at standard PD with PD with Mid-Spain POE Mid-Span RJ-45
assignment
Pin out of Cisco non-802.3af standard PD Pin out of POE Mid-Span
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
PIN NO SIGNAL
1 RX+
2 RX-
3 TX+
4 VCC-
5 VCC-
6 TX-
7 VCC+
8 VCC+
Before you powered PD, please check whether the RJ-45 connector pin assignment follows IEEE 802.3af / IEEE 802.3at
standard; otherwise, you may need to change one of the RJ-45 connector pin assignments, which is attached with the UTP
cable.
57
User’s Manual of HPOE-1200G / HPOE
2400G