PLANET HPOE-1200G - Manual (Page 24)

 Configuration Setting
Allow to back up or restore system configuration. Explained in section 4.3.6 .
 Factory Default
Allow to reset system to factory default setting. Explained in section 4.3.7 .
 System Log
Allow to enable system log and to record system log. Explained in section
4.3.8 .
 System Reboot
Allow to reboot system. Explained in section 4.3.9 .
4.3.1 System Information
This section displays system information of PoE Injector Hub as the screen in Figure 4-3-1 appears. Table 4-3-1 describes
the system information of the PoE Injector Hub.
Figure 4-3-1: System Information Web Page Screen
Object Description
 System Name
Displays the PoE Injector Hub model name.
 MAC Address
Displays the MAC Address of PoE Injector Hub.
 Software Version
Displays the current firmware version of PoE Injector Hub.
 Hardware Version
Displays the hardware version of PoE Injector Hub.
 Attain IP Protocol
Displays the currently attained IP protocol of PoE Injector Hub.
 IP Address
Displays the current IP address of PoE Injector Hub.
 Subnet Mask Displays the current subnet mask address of PoE Injector Hub.
 Gateway Displays the current gateway address of PoE Injector Hub.
 Description Displays the system description of PoE Injector Hub.
 System Date
Displays the current system date of PoE Injector Hub. The system date will be
correct if NTP function is enabled and the Hub is connected to Internet.
 System UpTime Displays when the system will start up..
Table 4-3-1: Descriptions of the System Information Objects Screen
24
User’s Manual of HPOE-1200G / HPOE
2400G