PLANET ICA-3250V - Manual (Page 18)

18
2.6 Bullet Type – ICA-HM316W
2.6.1 Package Content
IP Camera Unit x 1 l
Power Adapter x 1 l
Screw Package x 1 l
Stand x 1 l
5dbi Antenna x 1 l
User’s Manual CD-ROM x 1 l
Quick Installation Guide x 1 l
2.6.2 Physical Details
1. RJ-45 LAN socket: Connect to PC or Hub/Switch.
For connecting to 10Base-T Ethernet or 100Base-TX Fast Ethernet cable, this
Ethernet port built N-Way protocol can detect or negotiate the transmission speed
of the network automatically. Please use CAT-5 cable to connect the Network
Camera to a 100Mbps Fast Ethernet network switch or hub.
2. I/O Control Instruction
I/O terminal connector is used for such functions as motion detection, event
triggering, and alarm alert. It provides the interface to I/O terminal.
3. Digital Input (GND + Alarm)
An alarm input for connecting devices can toggle between an open and closed
circuit, for example, PIRs, door/window contacts, glass break detectors, etc. When
a signal is received, the status changes and the input becomes active.
4. Relay Output (COM+N.O.) / (COM+N.C.)
An output to relay switch, for example, LEDs, sirens, etc.
5. Digital Input/Alarm Input
1) GND (Ground): Initial status is LOW
2) Alarm: Max. 50mA, 3.3VDC
6. Relay Output
1) N.C. (Normally Closed): Max. 1A, 24VDC or 0.2A, 110~240VAC
2) COM: (Common)
3) N.O. (Normally Open): Max. 1A, 24VDC or 0.2A, 110~240VAC