PLANET ICA-510 - Manual (Page 3)

Cam Viewer Lite
page- 2
1. Introduction
Cam Viewer Lite is the basic bundle software, provides the general function for your daily
operation. For more powerful functions, you may install the Cam Viewer Pro 30 days trial version
to operate. After 30 days testing, you can contact to your local dealer or direct connect to PLANET
sales team (
[email protected] ) for the Cam Viewer Pro.
2. System Requirement
Total FPS* ~600 600~480 480~240 240~120 120~
CPU Intel Core 2
Duo QX6800
Intel Core 2
Duo E6600
Intel Pentium
D 930
Intel P4 3.0
GHz
Intel P4 2.8
GHz
RAM 4 GB 2 GB 2 GB 1 GB 1 GB
Chipset of
Motherboard
Intel 946 or 965 chip, Intel Chipset recommended
VGA Card ATI Radeon 9200, nVIDIA GeForce FX-5200, Intel 945/965 or above (ATI
recommended)
Ethernet 100Base-TX or above, Gigabit LAN recommended
Hard Disk 160 GB or above
O.S. Windows 2000 / XP / 2003
Total FPS: Means all the cameras will spend how many frames when this software works.
Suppose there are 10 cameras, each one will work with 30fps, the total fps should be 300fps.
3. Software Installation
1. Insert the bundled Cam Viewer CD disk into the CD-ROM drive to launch the autorun program.
Once completed, a welcome menu screen will appear. Click the “Cam Viewer Lite” hyperlink,
the below InstallShield Wizard dialog box will appear.
Note: If the welcome screen does not appear, click “Start” at the taskbar. Then, select “Run” and
type “D:\CamViewer Lite\setup.exe”, assume “D” is your CD-ROM drive.