PLANET IGS-504HPT - Manual (Page 32)

32
6. Cable Connection Parameters
The wiring details are as shown below:
100FX Fiber Optic Cables:
Standard Fiber Type Cable Specification
100BASE-FX (1310nm)
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
100BASE-BX-U
(TX :1310/RX :1550nm)
100BASE-BX-D
(TX :1550/RX :1310nm)
Single-mode 9/125μm
1000X Fiber Optic Cables:
Standard Fiber Type Cable Specification
1000BASE-SX
(850nm)
Multi-mode 50/125μm or 62.5/125μm
1000BASE-LX
(1310nm)
Multi-mode 50/125μm or 62.5/125μm
Single-mode 9/125μm
Wiring Distances:
Standard Fiber
Diameter
(micron)
Modal Bandwidth
(MHz * km)
Max. Distance
(meters)
1000BASE-SX Multi-mode
62.5
62.5
50
50 100
200
400
500 220
275
500
550
1000BASE-LX
Multi-mode
62.5
50
50 5
4
5
550
Single-mode 9 N/A 5000
1000BASE-ZX Single-mode 9 N/A ~70,000
Note
The single-mode port (1000BASE-LX port) of the IGS-624HPT
provides an additional margin allowing 10/20/30/40/50/70/120 km
Gigabit Ethernet to link to single mode fiber.