PLANET IGS-504HPT - Manual (Page 6)

6
Chapter 4 Switch operation
The chapter explains the Industrial Gigabit PoE+ Switch transmit operation.
Chapter 5 Troubleshooting
The chapter explains the troubleshooting of the Industrial Gigabit PoE+ Switch.
Chapter 6 Cable Connection Parameters
The chapter contains the cable connection parameters of the Industrial Gigabit
PoE+ Switch.
Appendix A
This chapter contains cable information of the Industrial Gigabit PoE+ Switch.
1.3 Product Features
Physical Port
IGS-504HPT

5-Port 10/100/1000BASE-T RJ45 with 4-Port IEEE 802.3af/802.3at PoE+
injector
IGS-624HPT

4-Port 10/100/1000BASE-T RJ45 with IEEE 802.3af/802.3at PoE+ Injector
 2 SFP interfaces, 100/1000BASE-X dual mode (DIP switch control)
Power over Ethernet
 Complies with IEEE 802.3af/IEEE 802.3at Power over Ethernet Plus End-Span
PSE
 Up to 4 IEEE 802.3af/802.3at devices powered
 Supports PoE Power up to 30.8 watts for each PoE port
 Provides 52V DC power over RJ45 Ethernet cable to PD with Ethernet port
 Auto-detection of IEEE 802.3af/at equipments and protects devices from being
damaged by incorrect installation
 Remote power feeding up to 100m
Layer 2 Features
 Supports auto-negotiation and 10/100Mbps half/full duplex and 1000Mbps full
duplex mode
 Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause
frame flow control (half-duplex)
 Automatic address learning and address aging
Industrial Case/Installation
 IP30 aluminum metal case protection
 DIN rail and wall-mount design