PLANET VIP-256PT - Manual (Page 33)

802.3af PoE SIP IP Phone
VIP-256PT
Network Address Server Settings (DHCP)
DHCP Server - It will assign the IP Addressed set here to devices that connect to the LAN port.
Number of Address - You may limit the number of addresses your router hands out.
Support Three mode disables, NAT, Bridge mode,
Item Descriptions
Local DHCP
Server I
Enable / Disable DHCP Server.
f PC port is not in NAT mode, user can not enable DHCP server.
Start IP Address
T IP phone will attribute to clients. he starting IP address which
Note: The Network Sect of DHCP Server Start Address should be the
same with the one that VIP-256PT’s PC port.
Generally speaking, you can use the default setting.
Number of
Number of IP address will distribute to clients.
Address
The interval of DHCP will send request to continue in period of validity.
Client Lease Time
Unit is hour.
Primary DNS that DHCP Server will distribute.
Primary DNS
You can use the default setting.
Secondary DNS that DHCP Server will distribute.
Secondary DNS
You can use the default setting.
Enable / Disable DHCP Server. Local DHCP
If PC port is not in NAT mode, user can not enable DHCP server. Server
33