PLANET MC-1610MR - Manual (Page 11)

2.2 Rear Panel
The MC-1610MR equip with one 100~240V AC power supply unit and MC-1610MR48 equip with one DC -48V power supply
unit on its standard package, both MC-1610MR and MC-1610MR48 provide one spare power supply unit slot for option re-
dundant power supply installation. A redundant power supply is also provided to enhance the reliability with options of either
100~240V AC power supply unit or DC -48V power supply unit.
Figure 2-3: Rear panel of Managed Media Converter Chassis
Install and remove the power supply unit
To install a power supply unit to Managed Media Converter Chassis, please fasten the hand screw clockwise and slide in the
power supply unit to the Managed Media Converter Chassis.
To remove a power supply unit out the Managed Media Converter Chassis, please loose the hand screw counter clockwise and
pull out the power supply unit from the Managed Media Converter Chassis.
Figure 2-4: Install and remove the power supply unit of Managed Media Converter Chassis
Power Notice:
1. The device is a power-required device, it means, it will not work till it is powered. If your networks should active all the time,
please consider using UPS (Uninterrupted Power Supply) for your device. It will prevent you from network data loss or
network downtime.
2. In some area, installing a surge suppression device may also help to protect your Managed Media Converter Chassis from
being damaged by unregulated surge or current to the Managed Media Converter Chassis.
11