PLANET MC-1610MR - Manual (Page 64)

6. LINK PASS THROUGH FUNCTION
The LFP function includes the Link Fault Pass Through function (LLCF/LLR). LLCF/LLR can immediately alarm administrators
the problem of the link media and provide efficient solution to monitor the net.
LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter’s
fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber
line loss the link, the converter’s fiber will disconnect the link of transmit. Both can immediately alarm administrators the
problem of the link media and provide efficient solution to monitor the net.
6.1 Link Loss Carry Forward (LLCF)
The LLCF function for troubleshooting a remote connection. When LLCF is enabled, the FL/TP ports do not transmit a link
signal until they receive a link signal from the opposite port.
The diagram below shows a typical network configuration with a good link status using FST-8 / GST-7 / GST-8 Media Con-
verter boards for remote connectivity.
Management Switch/Hub Media Media Switch/Hub Management
Station w/SNMP Converter Converter w/SNMP Station
● LED lit = established link ○ LED unlit = no link
LLCF is ON LLCF is ON
TP Fiber TP
If the connection breaks, FST-8 / GST-7 / GST-8 Media Converter boards that link loss forward to the switch/hub which gen-
erates a trap to the management station. The administrator can then determine the source of the issue.
Management Switch/Hub Media Media Switch/Hub Management
Station w/SNMP Converter Converter w/SNMP Station
● LED lit = established link ○ LED unlit = no link
LLCF is ON
LLCF is ON
TP Broken TP
64