PLANET MC-1610MR - Manual (Page 13)

2.3.2 Rack Mounting
To install the Managed Media Converter Chassis in a 19-inch standard rack, follow the instructions described below.
Step 1: Place your Managed Media Converter Chassis on a hard flat surface, with the front panel positioned towards your front
side.
Step 2: Attach a rack-mount bracket to each side of the Managed Media Converter Chassis with supplied screws attached to
the package. Figure 2-5 shows how to attach brackets to one side of the Managed Media Converter Chassis.
Figure 2-5 Attaching the brackets to the Managed Media Converter Chassis
Caution:
You must use the screws supplied with the mounting brackets. Damage caused to the parts by
using incorrect screws would invalidate your warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite side.
Step 5: After the brackets are attached to the Managed Media Converter Chassis, use suitable screws to securely attach the
brackets to the rack, as shown in Figure 2-6 .
Figure 2-6 Mounting the Managed Media Converter Chassis in a Rack
Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and supply
power to your Managed Media Converter Chassis.
13